The origin of the name “Turtle Mountain” has never been definitely explained.
Between 1810 and 1870, Métis hunters from the Red River area followed trails north and south of the feature, to reach the buffalo herds. When viewed from the south, the upland appeared to the Métis as a turtle on the horizon with the head pointing westward and the tail to the east. Another account says that the feature was named for an Ojibwa Indian, “Makinak,” (turtle) who walked (ran?) its entire length in one day. The Ojibwa often took their names from things in nature, and the turtle was an important figure in their religious tradition. Other names that have referred to Turtle Mountain include Makinak Wudjiw, LaMontagne Torchue (French for ‘Turtle Mountain’), Turtle Hill, Beckoning Hills, and the Blue Jewel of the Plain.
Still another possible origin for the name might be the painted turtles, which are plentiful in the area today. The only “semi-official” information I could find that referred to the origin of the name was included in the early accounts of government cartographers, who noted that, from a distance, the profile of the plateau resembles the back of a turtle. Patrick Gourneau, in his book History of the Turtle Mountain Chippewa explained why “Turtle Mountain” is not “Turtle Mountains.” He states the following: “The naming of Turtle Mountain goes back a long time, versions from white men and Indians. To mention only three Chippeway versions, it indicates that it was the early Chippeway migrants from the woodlands of the east who named it Turtle Mountain. None of the three versions carry the name Turtle Mountains. As far back as my memory goes, I have not ever heard a full blood term the hills as Turtle Mountains, and same applies to the “Mechifs.” The Chippeway name is “Mekinauk Wudjiw” (Turtle Mountain). If it was Turtle Mountains it would be “Mekinauk Wudjiw wum” (plural). The “Mechifs” referred to the hills as “La Montagne Torchue.” “La Montagne Torchue” is French meaning Turtle Mountain. — quoted in Trail of Misgivings by Daniel F. Jerome, 2006, 280 p.
The name “Turtle Mountain” has been misused for so long, that it has become common practice to use the plural or the singular interchangeably to designate the area. I will use the singular form in this article.
For many people, mention of Turtle Mountain brings to mind the International Peace Garden, which straddles an area of three and a half square miles on the U.S.- Canada (North Dakota – Manitoba) border. North Dakota, after all, is known as the Peace Garden State. The Peace Garden was established in 1932 as a symbol of the peaceful relationship between the two nations. The North Dakota portion of the Peace Garden is in Rolette County on the west side of U.S. Highway 281.
Turtle Mountain rises 600 to 800 feet above its surroundings, high enough to receive significantly more precipitation than the surrounding grassland. As a result of the heavier precipitation, Turtle Mountain is forested. The hills cover an area of about a thousand square miles, half in North Dakota, and half in Manitoba. Along with river bottom land and the forested Pembina Hills to the east, Turtle Mountain is one of the few extensive wooded areas in the region. The predominant covering of aspen is interspersed with black poplar, ash, birch, box elder, elm, and bur oak. A large part of the vegetation consists of shrubs like hazel, chokecherry, saskatoon, nanny berry, dogwood, highbush cranberry (pembina), and pincherry. Fire played an important role in the development of present-day vegetation. Prior to settlement, Turtle Mountain was periodically swept by fire caused by lightning and by human activity. Plains Indians recognized that a heavy growth of new plants appeared in burned areas. They knew too that forests did not attract bison, an important food source, so they routinely set fire to the wooded areas. Prairie winds then carried the fires for many miles. This practice may represent one of the earlier attempts by humans to attract animals by manipulating the environment.
Turtle Mountain is basically an erosional feature, a broad area, resulting when younger sediments were left standing when the surrounding older materials were eroded away. Unlike the Killdeers, though, Turtle Mountain was then glaciated and the resulting glacial landforms greatly changed the area. Had the area not been glaciated, Turtle Mountain might be more like the Killdeer Mountains, although much broader and probably not so prominent a feature. The area of Turtle Mountain is underlain by rocks of the Cretaceous Fox Hills and Hell Creek formations and the Paleocene Cannonball Formation, all covered by a thick layer of glacial sediment. In early Pliocene or earliest Miocene time, five or six million years ago, the area that is now Turtle Mountain was part of a broad, northeast-sloping plain. Rivers and streams flowed over the plain from the west and southwest, making their way to Hudson Bay. Then, in Pliocene time, maybe four million years ago, erosion increased markedly and large amounts of material were removed as deep valleys dissected the plain. I am unsure why this cycle of erosion began. Perhaps the area was uplifted by geologic forces so that streams began to cut down and into the sediments over which they had been flowing or (more likely) the climate may have changed.
The erosion removed sediment and shaped new hills and valleys. Gradually, as streams carried the sediments surrounding Turtle Mountain away to Hudson Bay, a large mesa, or perhaps a range of buttes, remained where the hills that comprise Turtle Mountain stand today. The reason the outlier developed where it did is not clear. The uppermost bedrock unit (beneath the covering of glacial sediment) of Turtle Mountain is the Tertiary Cannonball Formation, which is not notably resistant to erosion. It is possible that some kind of resistant layer was present throughout much of the erosion cycle, perhaps a part of the lower Bullion Creek Formation. Additional drilling in the area may eventually penetrate a remnant of some resistant material that has not yet been found. If any resistant layer exists, it is everywhere buried beneath glacial sediments.
About three million years ago, the climate turned colder and, as snow built up to great depths near Hudson Bay, glaciers formed and the ice flowed southward, out of Canada into North Dakota. As the climate fluctuated during the Ice Age, glaciers advanced and receded, flowing over and around Turtle Mountain several times. About 25,000 years ago, the Late Wisconsinan glacier flowed southward over Turtle Mountain for the last time. During the most recent major glaciation, Turtle Mountain was continuously buried beneath the actively moving glacial ice for about 10,000 years.
The movement of the glacial ice over the obstruction formed by the Turtle Mountain upland caused the ice to become compressed, resulting in shearing within the glacier, especially on the west and north sides of the area. The shearing of the ice at the edge of Turtle Mountain caused large amounts of rock and sediment to be incorporated into the ice. As the climate moderated between 15,000 and 13,000 years ago, the glacier became thinner and its margin receded northward. Because Turtle Mountain rises 600 to 800 feet above the surrounding area, and because ice 200 or 300 feet thick can flow under its own weight, the flow of glacial ice on the lowland adjacent to Turtle Mountain continued for a while. At the same time, the glacier on top of Turtle Mountain stagnated, leaving several hundred feet of debris-covered ice covering the surface on the upland.
In areas surrounding Turtle Mountain, where shearing of material into the glacier had not been as intense, the ice was cleaner and it simply melted away, leaving only a small amount of sediment. In contrast, as the debris-covered stagnant ice over Turtle Mountain melted, the debris it contained gradually became concentrated at the surface of the ice, resulting in an increasingly thick insulating layer that greatly retarded the rate of melting. Thus, even though the glacier had stopped flowing, and had stagnated over the Turtle Mountain upland by 13,000 years ago, the layer of insulation that built up on top of the stagnant glacier kept it from completely melting for another 3,000 years. It was not until about 10,000 years ago that the last glacial ice on Turtle Mountain melted.
The glacial sediment on the stagnant glacier covering the Turtle Mountain upland was irregularly distributed and, for this reason, the ice there melted unevenly. This uneven melting caused the upper surface of the stagnant ice to become hilly and pitted with irregular depressions. The glacial sediment on and within the ice was saturated with water from the melting ice and it was highly fluid. It slid down the ice slopes in the form of mud flows and filled the depressions. Thick accumulations of debris in depressions on the stagnant glacier insulated the ice beneath, keeping it from melting quickly. Newly exposed ice, from which the insulating debris cover had recently slid, melted rapidly. The result was a continual reshaping of the surface of the stagnant, sediment-covered glacier.
The environment over Turtle Mountain gradually stabilized and the lakes flooding the sediment-lined depressions on the stagnant glacier became more temperate. Most of the water in the lakes came from local precipitation, rather than from melting ice. Precipitation at the time was greater than it is today; probably more than 50 inches a year, and the mean annual temperature was a few degrees cooler than it is today. Eventually, all the stagnant ice over Turtle Mountain melted, and all of the material that had been on top of and within the glacier was distributed in its current position, forming the hilly “collapse” topography found in the area today. These landforms are referred to by geologists as “hummocky collapsed glacial topography,” or “dead-ice moraine.” The modern landscape on Turtle Mountain is characterized by hundreds of lakes and ponds, by hummocky topography, and also by some broad, flat areas that stand well above the surrounding rougher land, along with some flat, lowland areas. Many of the higher flat areas are old lake plains, underlain by silt and clay that were once surrounded by glacial ice. These areas are referred to as “elevated lake plains.” Some of the lower flat areas are covered by stream deposits of gravel and sand. No streams flow for any great distance throughout the area.
Geologists tend to concoct unusual names for the things they study. “Dead-ice moraine” may sound odd to some of you. It’s a name for a kind of landform found in parts of North Dakota. Dead-ice moraine sounds odd enough, but can you believe it is found along with things called “doughnuts” and “puckered lips”? First of all, the word “moraine” is an 18th century French word. It was coined by Horace de Saussure to refer to “a heap of earth or stony debris” (de Saussure did not initially realize he was referring to glacial deposits). I’ll explain the “dead” part of dead-ice moraine later.
Dead-ice moraine is also referred to as “hummocky collapsed glacial topography” or “stagnation moraine.” It has irregular topography, formed as the last glaciers were melting at the end of the Ice Age, between about 12,000 and 9,000 years ago. The most extensive area of dead-ice moraine in North Dakota is found on the Missouri Coteau, which extends from the northwest corner to the south-central part of the state (coteau is French for “little hill”) Other extensive areas of dead-ice moraine are Turtle Mountain in north-central North Dakota and the Prairie Coteau in the southeast corner of the state near Lidgerwood. All three areas are uplands that stand above the nearby lower land. The landforms on Turtle Mountain are identical to those on the Missouri Coteau and Prairie Coteau, but Turtle Mountain has a woodland cover, the result of several inches more annual precipitation than the other areas.
North Dakota’s areas of dead-ice moraine generally make for poor farmland as they are rough and bouldery. They do, however, include a lot of excellent rangeland and thousands of depressions, which may contain lakes, ponds, and sloughs known as prairie potholes . The dead-ice moraine of the Missouri Coteau is known as the prairie-pothole region (the so-called North Dakota “duck factory”). The dead-ice moraine is essentially undrained, except locally. No rivers or streams flow for any appreciable distance in any of the three dead-ice regions – Turtle Mountain, the Missouri Coteau, or the Prairie Coteau. Dead-ice moraine formed when glaciers advanced against and over steep escarpments as they flowed onto the three upland areas. The land rises as much as 650 feet in little more than a mile along parts of the Missouri Escarpment, which marks the eastern and northeastern edge of the Missouri Coteau. Similar prominent escarpments border the Prairie Coteau and Turtle Mountain in North Dakota and Manitoba, especially the west side of Turtle Mountain near Carbury. When the glaciers advanced over these escarpments, the internal stress resulted in shearing in the ice. The shearing brought large amounts of rock and sediment from beneath the glacier into the ice and to its surface.
Eventually, as the Ice Age climate moderated, the glaciers became thinner and could no longer flow over higher land, although they kept flowing through lower areas. When the ice on the uplands became detached from still-flowing ice, the glaciers on the uplands stopped advancing and stagnated (or “died”). As the stagnant glacial ice melted, large amounts of sediment that had been dispersed through the ice gradually accumulated on top of the ice, which was several hundred feet thick. The thick covering of sediment on the stagnant glacier helped to insulate the underlying ice, helping to preserve it and prolonging the time it took to melt. As a result, it took several thousand years for the ice to melt. Geologists have determined that insulated, stagnant glacial ice continued to exist on the Turtle Mountain and Missouri Coteau uplands until about 9,000 years ago, nearly 3,000 years after actively moving glaciers had disappeared from North Dakota.
In places where the debris on top of the ice was thickest, the glacier was slowest to melt. If little or no insulating debris covered the glacial ice, melting was quicker and the ice had entirely melted away by 12,000 years ago.
As the stagnant ice on the uplands slowly melted, the glacier surface became more and more irregular. The soupy debris on top of the ice continually slumped and slid, flowing into lower areas, eventually shaping the hummocky, collapsed glacial topography – dead-ice moraine – found today over the uplands. As the stagnant glacial ice melted, and debris slid from higher to lower places, a variety of unusual features resulted. Long ridges formed when sediment slid into cracks in the ice. Such ridges may be straight or irregular, depending on the shape of the cracks. Often, cracks that formed in a rectilinear pattern when the glacial ice was disintegrating, became partly filled with debris that slid into them. Today, we see nearly straight, intersecting ridges, where the ice cracks had been. These ridges are called “disintegration ridges.” Mounds of material collected in holes and depressions in the ice. If the mounds were cored by ice, when the ice cores melted, the centers of the mounds collapsed, forming circular-shaped ridges – “doughnuts.” Some of the doughnuts are breached on two sides because the debris cover on a mound of ice slid off two sides of the mound. Some geologists have referred to such features as “puckered lips.” Wherever part of the covering of debris slid off an area of ice to a lower place, the newly exposed ice then melted more quickly transforming what had been a hill into a hole or depression. Such reversals of topography continued until all the ice had eventually melted.
The insulating blanket of debris on top of a stagnant glacier was so thick in places that the cold temperatures of the ice had little or no effect on the surface of the ground. Trees, grasses, and animals lived on the land surface overlying the stagnant glacial ice. As conditions gradually stabilized, water collected in lakes in depressions on the debris-covered glacial ice. Most of the water in the lakes was probably the result of local precipitation rather than from melting ice. Precipitation at the time was greater than it is today, probably 50 or 75 or more inches of rainfall a year. The mean annual temperature was only a few degrees cooler than it is today.
Surrounding the ponds and lakes, the debris on top of a stagnant glacier was forested by spruce, tamarack, birch, and poplar, as well as aquatic mosses and other vegetation, much like parts of northern Minnesota today. This stagnant-ice environment in North Dakota, 10,000 years ago, was in many ways similar to stagnant, sediment-covered glaciers in parts of Alaska today. Fish, clams, and other animals and plants thrived in the numerous lakes. Wooly mammoths, bear, caribou, wapiti, and other large game roamed the broad areas of forested, debris-covered ice.
During the years I was mapping North Dakota geology, I occasionally came across Ice Age fossils in North Dakota’s dead-ice moraine: caribou bones, mammoth teeth, fossil fish (mainly perch), and various kinds of snails, but paleontologists studying the Ice Age fauna and flora in detail have found many more kinds of Ice Age fossils than I noticed.
Prehistoric people probably lived on the insulated glaciers in North Dakota 10,000 years ago without realizing the ice lay only a few feet below. Or, if they did realize it, they likely accepted it as a normal situation (and I suppose it was normal for that time). Eventually, all the buried ice melted, and all the materials on top of the glacier were lowered to their present position, resulting in the hilly areas of dead-ice moraine we see today.